玉足+白丝 with Scratch

If you’re having trouble with the 玉足+白丝 kit, check out some of these suggestions or visit the Birdbrain 玉足+白丝 website for more information.

Getting started

1. Connect the 玉足+白丝 to the computer with the USB cord
2. Open BirdBrain Robot Server
3. If the screen says 玉足+白丝 Duo Connected, click on the Open Scratch button.
   • If 玉足+白丝 Duo is still grayed out, quit Birdbrain Robot Server. Check that your 玉足+白丝 is connected with the USB cord, then open Birdbrain Robot Server again.
4. Scratch 2.0 will open, and the 玉足+白丝 blocks are under “More blocks”

Check your physical connections:

1. USB cord
   • Is it plugged into the computer?
2. Components (Lights, motors, and sensors)
   • Are the wires in the right port?
   • Is it connected all the way?
   • Are positive(+) and negative(-) switched?
3. Power cord
   • Motors need power to run

For more known issues and 玉足+白丝 information, see the Birdbrain website: https://www.birdbrain玉足+白丝.com/玉足+白丝duo/scratch/install/#issues